2-Way, 4-Way, and 8-Way power divider/combiners with 2.92mm connectors operating 6-40 GHz

Wilkinson Power Divider Models with 2.92mm Covering 6-40 GHz Band

September 11, 2019/in New Products, Power Divider/Combiners, Uncategorized/by JFW Eng Dept

JFW has added three new reactive Wilkinson type power divider/combiner models to our product offering. These models cover 6 GHz to 40 GHz and are available with 2.92mm female connectors. The Wilkinson design is ideal for RF signal fan-in or fan-out applications where low path loss is desired.

50PD-867 (2-Way, 6-40 GHz, 2.92mm female)
50PD-868 (4-Way, 6-40 GHz, 2.92mm female)
50PD-869 (8-Way, 6-40 GHz, 2.92mm female)

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

Wilkinson Power Divider Models with 2.92mm Covering 6-40 GHz Band

Product Search

Resources

Products

Contact