50C-053-XX 50 Ohm resistive coupler with N male/female/female

Resistive Coupler w/ 10dB Bi-directional Coupling Covering DC-3.1 GHz

October 1, 2018/in Couplers, New Products/by JFW Eng Dept

JFW model 50C-053-XX is a 50 Ohm resistive coupler available with 10dB coupling value. This model covers DC to 3.1 GHz and is rated for 5 Watts. The most popular RF connector configuration is N male/N female/N female. The unit is available with N or SMA connectors with any male/female configuration.

Resistive Coupler Features:

Couples in both directions
Couples DC and RF signals
Variety of RF configurations
Available in 50 Ohm or 75 Ohm
Custom coupling values available

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

Resistive Coupler w/ 10dB Bi-directional Coupling Covering DC-3.1 GHz

Product Search

Resources

Products

Contact