Bolt Down Termination 200 Watt | DC-6 GHz | 50T-689

Conduction Cooled 50 Ohm Terminations | 200 Watts | DC-6GHz

May 17, 2023/in New Products, Terminations/by JFW Eng Dept

JFW has recently added four new models to our website. They are conduction cooled (aka bolt down) type 50 Ohm terminations. The enclosure is flanged with 4 mounting holes so it can be bolted down to a cooling plate or heatsink. The terminations are available with SMA or N type connectors.

Model 50T-686: 100 Watts average | DC-3 GHz
Model 50T-687: 100 Watts average | DC-6 GHz
Model 50T-688: 200 Watts average | DC-3 GHz
Model 50T-689: 200 Watts average | DC-6 GHz

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

Conduction Cooled 50 Ohm Terminations | 200 Watts | DC-6GHz

Product Search

Resources

Products

Contact