Conduction Cooled 50 Ohm Fixed Attenuators | 100 Watts

September 18, 2024/in Fixed Attenuators, New Products/by JFW Eng Dept

JFW has recently added two new models. They are conduction cooled (aka bolt down) type 50 Ohm fixed attenuators. The enclosure has through-holes for mounting so it can be bolted down to a cooling plate or heatsink. The fixed attenuators are available with BNC, N, SMA or TNC type connectors.

Model 50FHSR-XXX-100: 100 Watts average | DC-1 GHz
Model 50FHSR-XXX-100-3: 100 Watts average | DC-3 GHz

Recent Posts

18GHz DC Block models | Inner onlyOctober 7, 2024 - 3:02 pm
JFW has added four new 18GHz DC block models. All four models are inner only type DC blocks with 50 Ohm impedance. They are available with SMA or N type connectors. Model 50DB-081 SMA 10MHz to 18GHz 200Vdc Documentation Model 50DB-083 N 10MHz to 18GHz 200Vdc Documentation Model 50DB-085 SMA 9kHz to 18GHz 50Vdc Documentation […]
Programmable Attenuator with TTL control | 0.1-18 GHzOctober 3, 2024 - 1:22 pm
JFW model 50P-2101 SMA is a 50 Ohm programmable attenuator with simple to use TTL control. It operates 100MHz to 18GHz and is controlled via parallel TTL lines. Each control line controls 1 of the 7 attenuation sections (i.e. 0.5, 1, 2, 4, 8, 16, and 31.5dB). Activate multiple sections to achieve combinational dB values. […]
50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB stepsSeptember 27, 2024 - 9:43 am
JFW has added model 50BR-167 to the website. It is a 50 Ohm manual attenuator in a benchtop enclosure. It operates DC-3.6GHz and has attenuation range 0-110dB x 1dB steps. The unit has three knobs on the front panel. The knobs control three attenuators that are connected in series with each other. The attenuation setting […]

Conduction Cooled 50 Ohm Fixed Attenuators | 100 Watts

Product Search

Resources

Products

Contact