50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB steps

September 27, 2024/in New Products, Rotary Attenuators/by JFW Eng Dept

JFW has added model 50BR-167 to the website. It is a 50 Ohm manual attenuator in a benchtop enclosure. It operates DC-3.6GHz and has attenuation range 0-110dB x 1dB steps. The unit has three knobs on the front panel. The knobs control three attenuators that are connected in series with each other. The attenuation setting of the assembly is the combination of the three knob settings.

Manual Attenuator

50 Ohm impedance
DC-3.6 GHz
0-110dB by 1dB steps
N, SMA or TNC female
Data sheet
Outline drawing

Recent Posts

18GHz DC Block models | Inner onlyOctober 7, 2024 - 3:02 pm
JFW has added four new 18GHz DC block models. All four models are inner only type DC blocks with 50 Ohm impedance. They are available with SMA or N type connectors. Model 50DB-081 SMA 10MHz to 18GHz 200Vdc Documentation Model 50DB-083 N 10MHz to 18GHz 200Vdc Documentation Model 50DB-085 SMA 9kHz to 18GHz 50Vdc Documentation […]
Programmable Attenuator with TTL control | 0.1-18 GHzOctober 3, 2024 - 1:22 pm
JFW model 50P-2101 SMA is a 50 Ohm programmable attenuator with simple to use TTL control. It operates 100MHz to 18GHz and is controlled via parallel TTL lines. Each control line controls 1 of the 7 attenuation sections (i.e. 0.5, 1, 2, 4, 8, 16, and 31.5dB). Activate multiple sections to achieve combinational dB values. […]
50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB stepsSeptember 27, 2024 - 9:43 am
JFW has added model 50BR-167 to the website. It is a 50 Ohm manual attenuator in a benchtop enclosure. It operates DC-3.6GHz and has attenuation range 0-110dB x 1dB steps. The unit has three knobs on the front panel. The knobs control three attenuators that are connected in series with each other. The attenuation setting […]

50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB steps

Manual Attenuator

Product Search

Resources

Products

Contact