5 Watt & 10 Watt Fixed Attenuator models | DC-26.5 GHz | SMA

September 9, 2024/in Fixed Attenuators, New Products/by JFW Eng Dept

JFW has added two new 50 Ohm fixed attenuator models to our website. Model 50HFFA-xxx-5/26 (5 Watts average) and model 50HFFA-xxx-10/26 (10 Watts average). Both fixed attenuator models operate DC-26.5 GHz. They are available with SMA male/female connectors. Attenuation values available up to 30dB.

50HFFA-xxx-5/26

5 Watt fixed attenuator
DC-26.5 GHz
SMA male/female
Data sheet
Outline Drawing

50HFFA-xxx-10/26

10 Watt fixed attenuator
DC-26.5 GHz
SMA male/female
Data sheet
Outline Drawing

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

5 Watt & 10 Watt Fixed Attenuator models | DC-26.5 GHz | SMA

50HFFA-xxx-5/26

50HFFA-xxx-10/26

Product Search

Resources

Products

Contact