Assembly with 24 Attenuators 200-6000 MHz | 0-95dB x 1dB | 50PA-1197

24 Channel Attenuator Assembly | 200-6000MHz | 0-95 x 1dB Steps

/in , /by

JFW model 50PA-1197 SMA is a 50 Ohm benchtop attenuator assembly operating 200-6000MHz.  It contains 24 individually controlled step attenuators with attenuation range 0-95dB x 1dB steps.  Each attenuator has two ports that are both cabled to the rear panel.  The rear panel has a total of 48 SMA female connectors (i.e. two SMA per attenuator).

It can be remotely controlled via an Ethernet or Serial connection.  The keypad on the front panel can also be used to control the attenuators or setup the network settings.  Attenuators can be controlled individually or grouped into blocks.  Use the remote command Set Block to form a group of attenuators.  Use the Fade Block to step the attenuation setting of the attenuator group from one dB setting to another dB setting over a specified duration of time.

  • 24 individually controlled step attenuators
  • 0-95dB x 1dB
  • 200-6000 MHz
  • Ethernet/Serial remote control
  • SMA female