4-Way Power Divider/Combiner 0.5-8.4 GHz | 50PD-927 SMA

2-Way, 4-Way, 8-Way power divider models covering 0.5-8.4 GHz

October 10, 2023/in New Products, Power Divider/Combiners/by JFW Eng Dept

JFW has added three new power divider models to the website that operate 500-8400 MHz. The 2-way, 4-way, and 8-way models are available with SMA female connectors. They are a reactive type design which has low loss and isolation of 18dB typical. This type of reactive power divider/combiner is ideal for signal fan-in or fan-out application which require the lowest loss possible.

50PD-926 SMA | 2-Way | 500-8400 MHz

50PD-927 SMA | 4-Way | 500-8400 MHz

50PD-928 SMA | 8-Way | 500-8400 MHz

Recent Posts

Five new USB attenuator models | 4 ChannelJuly 1, 2024 - 2:44 pm
JFW has just added five new USB attenuator models to the website. All five models are 4 channel USB attenuators. Each attenuator is individually controlled using our GUI test software. They have a 50 ohm impedance and are available with SMA female connectors. 4 Channel USB Attenuator Models: 50P-2089 SMA (0-95 x 1dB, 200-6000MHz) 50P-2137 […]
4 Channel USB Attenuator | 200-6000 MHz | 0-95dB x 1dBJune 25, 2024 - 3:47 pm
JFW has a new 50 Ohm 4 channel USB attenuator to help automate your RF testing. JFW model 50P-2089 SMA operates from 200-6000Mhz with attenuation range 0 to 95dB by 1dB steps. All four attenuators are individually controlled. Test software is provided with the USB attenuator. If you would like to integrate the USB attenuator […]
How to cable to a directional coupler?May 24, 2024 - 1:21 pm
A directional coupler can be used to monitor a signal on a RF path. The through path is bi-directional, but it only couples the RF signal in one direction. The coupled path is also bi-directional. A signal into the coupled port will be injected onto the RF path. Coupler models with high coupling values (i.e. […]

2-Way, 4-Way, 8-Way power divider models covering 0.5-8.4 GHz

Product Search

Resources

Products

Contact