2 Watt Termination with TNC male or female | DC-18 GHz

November 4, 2024/in New Products, Terminations/by JFW Eng Dept

JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 Ohm impedance.

TNC Termination

DC-18 GHz
2 Watts average
50 Ohm impedance
TNC male or TNC female
Data Sheet
Drawing (TNC male)
Drawing (TNC female)

Recent Posts

Fixed Attenuators DC-8.4 GHz | 2W, 5W, 10W, 25W, 50W, 100WDecember 10, 2024 - 9:36 am
JFW has a line of 50 Ohm fixed attenuators that operate DC-8.4 GHz. They are available with N or SMA connectors. We created these models so that customers operating in bands such as mid-5G, Wi-Fi 6E and Wi-Fi 7 would not have to pay for 18GHz models. If you are not working at 18GHz, then […]
5 Watt Pushbutton Attenuator | 0-101dB x 1dB stepsDecember 9, 2024 - 9:06 am
JFW model 50B-053 is a 5 Watt pushbutton attenuator. It has 50 Ohm impedance and operates DC-1090MHz. It has attenuation range 0-101dB x 1dB steps. It is available with BNC, N, SMA or TNC connectors. There are 9 total pushbuttons. Activate multiple pushbuttons to create combinational attenuation settings. Manual Pushbutton Attenuator 5 Watts average 0-101dB […]
2 Watt Fixed Attenuators | SMANovember 27, 2024 - 9:17 am
JFW offers 2 Watt fixed attenuators with several different frequency band options. All of the below models have 50 Ohm SMA male/female connectors. Do not pay for an 18GHz attenuator if you are only working at 6GHz. Use an attenuator that matches your frequency band to keep your costs as low as possible. model 50HFFA-xxx-2/6 […]

2 Watt Termination with TNC male or female | DC-18 GHz

TNC Termination

Product Search

Resources

Products

Contact