New fixed IP Address for JFW’s Ethernet Test Box

January 25, 2022/in Engineering Tips/by JFW Eng Dept

The fixed IP address of our Ethernet Test Box is now 104.63.176.50 (tcp port 3001). If you have been testing our your software with our test box, you will have to update to use 104.63.176.50 (port 3001).

The test box is running our latest generation Ethernet/Serial firmware. You can make an Ethernet connection to the test box and then send/receive remote commands. The test box is available for JFW customers to use 24/7. The firmware allows for up to 12 simultaneous users.

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

New fixed IP Address for JFW’s Ethernet Test Box

Product Search

Resources

Products

Contact