RF Matrix Switch Guide Updated

January 20, 2022/in Application Notes/by JFW Eng Dept

Our RF Matrix Switch Guide was recently updated. The guide discusses four different types of matrix switch:

Blocking
Non-blocking
Super non-blocking
Common highway

The goal of the guide is to help engineers pick out the correct type of matrix switch with the necessary functionality. If you need additional help, please email any of our test system engineers:

brett@jfwindustries.com
calvin@jfwindustries.com
thad@jfwindustries.com

Recent Posts

32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]
6X6 Blocking Matrix Switch | 400-7125 MHzOctober 29, 2024 - 10:59 am
JFW model 50MS-471 is a 6X6 blocking matrix switch that operates 400-7125 MHz. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with N or SMA connectors. The matrix is constructed using switches on both halves of the matrix. A 6X6 blocking matrix can only have a maximum of 6 active […]

RF Matrix Switch Guide Updated

Product Search

Resources

Products

Contact