2 Watt Fixed Attenuator DC-6 GHz | 50HFFA-XXX-2/6SMA

2 Watt Fixed Attenuators | SMA

November 27, 2024/in Engineering Tips/by JFW Eng Dept

JFW offers 2 Watt fixed attenuators with several different frequency band options. All of the below models have 50 Ohm SMA male/female connectors. Do not pay for an 18GHz attenuator if you are only working at 6GHz. Use an attenuator that matches your frequency band to keep your costs as low as possible.

model 50HFFA-xxx-2/6 SMA | DC-6 GHz
model 50HFFA-xxx-2/8 SMA | DC-8.4 GHz
model 50HFFA-xxx-2/18 SMA | DC-18 GHz
model 50HFFA-xxx-2/26 SMA | DC-26.5 GHz

Recent Posts

2 Watt Fixed Attenuators | SMANovember 27, 2024 - 9:17 am
JFW offers 2 Watt fixed attenuators with several different frequency band options. All of the below models have 50 Ohm SMA male/female connectors. Do not pay for an 18GHz attenuator if you are only working at 6GHz. Use an attenuator that matches your frequency band to keep your costs as low as possible. model 50HFFA-xxx-2/6 […]
32 Attenuator Assembly for CATV Automated Testing | DC-1218MHzNovember 4, 2024 - 1:38 pm
JFW model 75PA-131 F is a 75 Ohm attenuator assembly that can be used to test CATV devices. The attenuator assembly operates DC-1218MHz and contains 32 individually controlled step attenuators with attenuation range 0-95.5dB x 0.5dB steps. Each attenuator has two ports that are both cabled to the rear panel with F female connectors. The […]
2 Watt Termination with TNC male or female | DC-18 GHzNovember 4, 2024 - 12:53 pm
JFW model 50T-706 is a 50 Ohm termination that operates DC-18GHz. It is available with TNC male or TNC female. It is rated for 2 Watts average input power. Schematically this part is a 50 Ohm resistor to ground. Connecting this part to an open 50 Ohm port will properly terminate the port with 50 […]

2 Watt Fixed Attenuators | SMA

Product Search

Resources

Products

Contact