50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB steps

September 27, 2024/in New Products, Rotary Attenuators/by JFW Eng Dept

JFW has added model 50BR-167 to the website. It is a 50 Ohm manual attenuator in a benchtop enclosure. It operates DC-3.6GHz and has attenuation range 0-110dB x 1dB steps. The unit has three knobs on the front panel. The knobs control three attenuators that are connected in series with each other. The attenuation setting of the assembly is the combination of the three knob settings.

Manual Attenuator

50 Ohm impedance
DC-3.6 GHz
0-110dB by 1dB steps
N, SMA or TNC female
Data sheet
Outline drawing

Recent Posts

Fixed Attenuators DC-8.4 GHz | 2W, 5W, 10W, 25W, 50W, 100WDecember 10, 2024 - 9:36 am
JFW has a line of 50 Ohm fixed attenuators that operate DC-8.4 GHz. They are available with N or SMA connectors. We created these models so that customers operating in bands such as mid-5G, Wi-Fi 6E and Wi-Fi 7 would not have to pay for 18GHz models. If you are not working at 18GHz, then […]
5 Watt Pushbutton Attenuator | 0-101dB x 1dB stepsDecember 9, 2024 - 9:06 am
JFW model 50B-053 is a 5 Watt pushbutton attenuator. It has 50 Ohm impedance and operates DC-1090MHz. It has attenuation range 0-101dB x 1dB steps. It is available with BNC, N, SMA or TNC connectors. There are 9 total pushbuttons. Activate multiple pushbuttons to create combinational attenuation settings. Manual Pushbutton Attenuator 5 Watts average 0-101dB […]
2 Watt Fixed Attenuators | SMANovember 27, 2024 - 9:17 am
JFW offers 2 Watt fixed attenuators with several different frequency band options. All of the below models have 50 Ohm SMA male/female connectors. Do not pay for an 18GHz attenuator if you are only working at 6GHz. Use an attenuator that matches your frequency band to keep your costs as low as possible. model 50HFFA-xxx-2/6 […]

50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB steps

Manual Attenuator

Product Search

Resources

Products

Contact