5 Watt & 10 Watt Fixed Attenuator models | DC-26.5 GHz | SMA

September 9, 2024/in Fixed Attenuators, New Products/by JFW Eng Dept

JFW has added two new 50 Ohm fixed attenuator models to our website. Model 50HFFA-xxx-5/26 (5 Watts average) and model 50HFFA-xxx-10/26 (10 Watts average). Both fixed attenuator models operate DC-26.5 GHz. They are available with SMA male/female connectors. Attenuation values available up to 30dB.

50HFFA-xxx-5/26

5 Watt fixed attenuator
DC-26.5 GHz
SMA male/female
Data sheet
Outline Drawing

50HFFA-xxx-10/26

10 Watt fixed attenuator
DC-26.5 GHz
SMA male/female
Data sheet
Outline Drawing

Recent Posts

18GHz DC Block models | Inner onlyOctober 7, 2024 - 3:02 pm
JFW has added four new 18GHz DC block models. All four models are inner only type DC blocks with 50 Ohm impedance. They are available with SMA or N type connectors. Model 50DB-081 SMA 10MHz to 18GHz 200Vdc Documentation Model 50DB-083 N 10MHz to 18GHz 200Vdc Documentation Model 50DB-085 SMA 9kHz to 18GHz 50Vdc Documentation […]
Programmable Attenuator with TTL control | 0.1-18 GHzOctober 3, 2024 - 1:22 pm
JFW model 50P-2101 SMA is a 50 Ohm programmable attenuator with simple to use TTL control. It operates 100MHz to 18GHz and is controlled via parallel TTL lines. Each control line controls 1 of the 7 attenuation sections (i.e. 0.5, 1, 2, 4, 8, 16, and 31.5dB). Activate multiple sections to achieve combinational dB values. […]
50 Ohm Manual Attenuator | DC-3.6GHz | 0-110dB x 1dB stepsSeptember 27, 2024 - 9:43 am
JFW has added model 50BR-167 to the website. It is a 50 Ohm manual attenuator in a benchtop enclosure. It operates DC-3.6GHz and has attenuation range 0-110dB x 1dB steps. The unit has three knobs on the front panel. The knobs control three attenuators that are connected in series with each other. The attenuation setting […]

5 Watt & 10 Watt Fixed Attenuator models | DC-26.5 GHz | SMA

50HFFA-xxx-5/26

50HFFA-xxx-10/26

Product Search

Resources

Products

Contact