Assembly with 48 Attenuators 200-7125 GHz | 0-95dB x 1dB | 50PA-1252

48 Attenuator Assembly for WiFi 6 Testing | 200-7125MHz

/in , /by

JFW model 50PA-1252 SMA is a 50 Ohm attenuator assembly that can be used to test WiFi 6 devices.  The attenuator assembly operates 200-7125MHz and contains 48 individually controlled step attenuators with attenuation range 0-95dB x 1dB steps.  Each attenuator has two ports that are both cabled to the rear panel with SMA female connectors.  The rear panel has a total of 96 SMA female (i.e. two SMA per attenuator).  The assembly is 19 inch rack mountable and 4RU high.

It can be remotely controlled via an Ethernet or Serial connection.  The keypad on the front panel can also be used to control the attenuators or setup the network settings.  Attenuators can be controlled individually or grouped into blocks.  Use the remote command Set Block to form a group of attenuators.  Use the Fade Block to step the attenuation setting of the attenuator group from one dB setting to another dB setting over a specified duration of time.

  • 48 individually controlled step attenuators
  • 0-95dB x 1dB
  • 200-7125 MHz
  • Ethernet/Serial remote control
  • SMA female
  • 19 inch rack mount chassis @ 4RU high